NEWSTUK RESTAURO

Extra fine white stucco
For indoor or outdoor use


FEATURES:

NEWSTUK RESTAURO is a white cement based stucco powder, composed of carefully selected resins, aggregates and special additives. The minimal presence of lime does not alter the final effect of the paints used.

INSTRUCTIONS FOR USE:
Thoroughly clean the surface to be treated, completely removing any residues of old paints and plastering not sufficiently anchored. Mix, manually and/or with electric stirrer at low speed in a bowl, 1 (one) part of clean water with 2 (two) parts of NEWSTUK RESTAURO up to obtain a homogeneous paste without lumps. Apply with spatula with horizontal and vertical strokes. NEWSTUK RESTAURO should be used in its original state, without adding any extraneous materials.

WHERE IT IS USED:
The product thus obtained is used to plug holes and cracks, for indoor and outdoor smoothing on concrete, plastering, bricks and even for small maintenance at home. Ideal for use in damp environments like bathrooms and back kitchens.

PRACTICAL TIPS:
Store the boxes on wooden pallets, in dry locations. Firmly close the package after a partial use. The presence of chlorine in the water leads to a faster drying. The presence of salt in the water leads to a slower drying. The use of dirty containers, with the presence of foreign materials, undermines the technical features of the stucco in terms both of mixing and drying.

USAGE NOTES:
Paints, coatings, wallpapers, etc., should be applied only after the complete drying and seasoning of the product. The preparation of NEWSTUK RESTAURO with electrical tools can alter the properties of the stucco. Therefore it is recommended to prepare small quantities, using the mechanical stirrer at a low number of revolutions ( <800 revolutions per minute).

Does not shrink, does not crack.
- Water-resistant.
- Easily sandable with fine grain.
- Applicable on any support.
- Very good adhesion and high filling power.
- Simple application and levelling.

PROCESSING TIME:
approx. 90 minutes.
 
APPLICATION TEMPERATURE:
5°C to 40°C
         
EDRYING AT 20 °C:
2 to 4 hours.
 
LAYER MAXIMUM THICKNESS:
approximately 5 mm.
         
YIELD:
1 m²/kg (thickness of approximately 1 mm).
 
VARNISHABLE:
after approx. 96/120 hours.
         
FOR INDOOR USE.
 
RECOMMENDED TOOLS:
spatula and trowel.
       
FOR OUTDOOR USE.
 
 
 
TECHNICAL DATA SHEET
 
SAFETY DATA SHEET